Your Customer’s Solar Panels Are Working. So Why Are They Complaining?


Imagine receiving a telephone call from a customer who had solar panels installed earlier in the year.
During the summer, everything seemed to be going well.
The customer could see electricity being generated, their system appeared to be working correctly and they were pleased with their investment.
Then winter arrived.
The days became shorter, the weather turned grey and the amount of electricity being generated started to fall.
Now the customer is worried.
They expected their solar panels to help reduce their electricity bills, but they are not seeing the same results they enjoyed during the warmer months.
They begin to question whether the system is working properly.
Perhaps they think something has been installed incorrectly.
They might even feel that the benefits of solar energy were overstated when they agreed to the work.
Your installation team checks the system and discovers that everything is operating as expected.
There is no fault.
The problem is that the customer did not fully understand how solar electricity generation changes throughout the year.
And that is where a perfectly good installation can become a customer complaint.
For businesses working under MCS certification, this situation highlights an important part of the installation process that can sometimes be overlooked.
Customer expectations.
Solar panels can generate electricity throughout the year, including during winter.
However, the amount of electricity they produce changes depending on daylight hours, weather conditions and the position of the sun.
If customers do not understand these differences before agreeing to an installation, they may be disappointed when winter arrives.
And disappointment can quickly turn into frustration.
For MCS installers, explaining seasonal performance is not simply about providing technical information.
It is about helping customers make informed decisions, understand their investment and know what to expect from their system.
Why Does Solar PV Generate Less Electricity in Winter?
Solar photovoltaic systems, usually called solar PV, turn sunlight into electricity.
They do not need hot weather to work.
In fact, solar panels can operate efficiently in cooler temperatures.
However, they do need light.
During winter, the UK experiences shorter days, lower sun angles and often more cloudy weather.
These conditions affect how much sunlight reaches the panels.
As a result, solar PV systems generally produce less electricity during the winter months than during spring and summer.
This is normal.
It does not automatically mean that the panels are faulty or that the installation has been completed incorrectly.
Shorter Days Mean Less Time to Generate Electricity
During summer, daylight can last well into the evening.
Solar panels have more hours available to generate electricity.
In winter, daylight hours are much shorter.
There is less time for the panels to receive sunlight, which reduces the amount of electricity they can produce.
For example, a customer may notice their system generating electricity from early morning until late afternoon during summer.
In December, the period of useful generation will be much shorter.
Even on a clear winter day, the total amount of electricity produced is likely to be lower than on a clear summer day.
The Sun Is Lower in the Sky
The position of the sun also changes throughout the year.
During winter, the sun sits lower in the sky.
This can affect how much sunlight reaches the panels, particularly if nearby buildings, trees or other objects create shadows.
A roof that receives plenty of sunlight during summer may experience more shading during winter.
The angle and direction of the panels also influence how much electricity the system generates.
This is why a proper assessment of the property is so important before installation.
Cloudy Weather Can Reduce Generation
Solar panels can still generate electricity on cloudy days.
However, heavy cloud cover reduces the amount of sunlight reaching them.
This can result in lower electricity production.
It is important to explain that solar panels do not simply stop working when the weather is cloudy.
They continue to generate electricity when sufficient light is available, although the amount produced may be much lower than on a bright, sunny day.
Customers who understand this are less likely to mistake normal changes in generation for a system fault.
The Biggest Problem Is Not Winter. It Is Unrealistic Expectations.
For many solar installation businesses, the challenge is not explaining how the technology works.
It is making sure customers understand what the technology can realistically achieve.
A customer may hear that solar panels can reduce electricity bills and assume those savings will remain the same throughout the year.
They may see examples of high electricity generation during summer and expect similar results in December.
Others may believe that installing solar panels means they will no longer need to buy electricity from their supplier.
These misunderstandings can lead to problems.
The installer may have completed the work correctly and provided accurate information, but if the customer has not understood that information, the relationship can still suffer.
Be Careful With Savings Claims
Solar PV systems can help households reduce the amount of electricity they purchase from the grid.
However, the savings achieved depend on several factors.
These include the amount of electricity the system generates, how much of that electricity the household uses, electricity prices and whether the customer receives payments for exporting unused electricity.
A household that uses much of its solar electricity during daylight hours may see different savings from one that uses most of its electricity in the evening.
Battery storage can also affect how electricity is used, although it brings additional costs and considerations.
Installers should avoid promising a fixed reduction in electricity bills unless the claim is supported by suitable evidence and clearly explained assumptions.
Even then, customers should understand that actual results can vary.
A realistic estimate is far more valuable than an impressive figure that the customer later feels was misleading.
For business owners and sales managers, this means reviewing how solar PV systems are presented during the sales process.
Are customers being shown annual generation estimates?
Do they understand that generation changes throughout the year?
Are the assumptions behind estimated savings explained?
And are employees making promises that the business cannot reasonably support?
These questions matter because the customer’s understanding often begins with the first sales conversation.
Annual Generation Is Not the Same as Monthly Generation
One of the most useful things an installer can do is explain the difference between annual electricity generation and monthly electricity generation.
An annual estimate shows how much electricity a solar PV system is expected to produce over a year, based on the assumptions used.
But that electricity will not be generated evenly across all twelve months.
In the UK, a larger share of annual solar electricity generation normally takes place during spring and summer.
Winter contributes a smaller share.
For example, consider a hypothetical system expected to generate 4,000 kilowatt-hours of electricity over a year.
That does not mean it will produce approximately 333 kilowatt-hours every month.
Some months may produce considerably more, while others produce much less.
How solar generation changes through the year
Illustrative monthly output for a hypothetical 4,000 kWh/year system, not an MCS performance estimate.
0 kWh150 kWh300 kWh450 kWh600 kWhJanFebMarAprMayJunJulAugSepOctNovDec
Example only. Actual output depends on location, roof angle, shading, weather and system design.
Showing customers a simple monthly generation chart can make these differences easier to understand.
Instead of focusing only on the annual figure, they can see how electricity production is expected to change throughout the seasons.
This helps them recognise that lower winter generation is part of the normal yearly pattern.
It also helps them understand why their electricity bills may change throughout the year, even after installing solar panels.
For MCS installers, clear explanations can help prevent confusion and support better customer decisions.
MCS Compliance: Why Clear Performance Estimates Matter
MCS certification is an important part of the UK’s small-scale renewable energy sector.
For businesses installing solar PV systems, it provides a framework for demonstrating that work is carried out to recognised standards.
This includes the technical requirements of the installation, the competence of those carrying out the work and the information provided to customers.
But MCS compliance is not simply about installing the correct equipment.
Customers also need accurate information about the system they are purchasing.
For solar PV installations, this includes suitable estimates of expected electricity generation.
The relevant MCS requirements set out how performance estimates should be prepared and presented.
Installers need to use the current requirements that apply to their certification and the work being carried out.
Explain the Figures, Not Just the Final Number
A customer may receive a quotation showing the expected annual electricity generation.
That information is useful.
However, it is not always enough on its own.
The customer should understand what the figure represents.
Is it an estimate rather than a guarantee?
What assumptions have been used?
Could shading affect the amount of electricity generated?
How might actual weather conditions change the results?
These questions should be answered clearly.
For example, if a property has a tree that creates additional shade during winter, the installer should consider its effect when assessing the system.
If a roof faces a direction that is less favourable for solar generation, the customer should understand how this may affect expected performance.
The aim is to provide information that helps the customer make a sensible decision.
A customer who understands the limitations of a system is better prepared for the changes they may see throughout the year.
Keep Your Sales and Installation Teams Working Together
One risk for growing solar businesses is allowing sales information and installation information to become disconnected.
A salesperson may discuss expected savings with the customer.
The technical team then designs the system using the actual property details.
If those details change the expected performance, the customer needs to receive updated information.
Imagine a salesperson provides an initial estimate before a full roof assessment has taken place.
During the assessment, the installation team identifies shading that could reduce electricity generation.
If the original estimate is not reviewed, the customer may make their decision using information that no longer reflects the proposed installation.
Clear communication between sales staff, designers and installers helps prevent these problems.
For business owners, it is worth reviewing who is responsible for checking estimates and making sure customers receive the correct information before work begins.
Solar PV in Winter: What Should Customers Expect?
Winter solar generation can sometimes be misunderstood.
Some customers believe that panels stop producing electricity when temperatures fall.
Others assume that a bright winter day should provide the same amount of electricity as a bright summer day.
Neither assumption is correct.
Solar panels respond to sunlight rather than outdoor temperature alone.
Cooler temperatures can actually benefit the electrical performance of solar panels.
However, the shorter days and lower position of the sun usually mean that total winter generation is lower.
A Sunny Winter Day Can Still Produce Electricity
A clear winter day can provide useful solar generation.
Customers may notice their system producing electricity during the middle of the day, particularly when the panels receive direct sunlight.
However, the shorter period of daylight limits the amount that can be generated across the whole day.
This is why looking at one particularly sunny day does not provide a reliable picture of winter performance.
Snow, Frost and Dirt
In some conditions, snow can cover solar panels and temporarily reduce electricity generation.
Frost or dirt may also affect performance, depending on the circumstances.
However, customers should not be encouraged to climb onto roofs or attempt unsafe cleaning.
If they are concerned about the condition of their panels, they should contact a suitable professional.
The installer should explain any recommended maintenance and provide appropriate safety information.
What About Battery Storage?
Some customers choose to install battery storage alongside solar panels.
A battery can store electricity for use at another time, depending on the system and its settings.
However, a battery does not increase the amount of sunlight available to the panels.
During winter, there may be less spare solar electricity available to charge the battery.
Customers should understand this before purchasing a system.
A battery may still provide benefits, but its performance and financial value depend on how the household uses electricity, the system design and the electricity tariff.
Clear explanations help customers understand what they are buying and avoid unrealistic expectations.
The Customer Handover Should Not Be Rushed
Imagine spending several days installing a solar PV system.
The panels are fitted, the electrical work is completed and the required checks have been carried out.
Everything is working correctly.
The customer receives their documents, and the installation team leaves.
But does the customer know how to check what their system is generating?
Do they understand the information shown on their monitoring equipment?
And do they know what to do if the figures look different from what they expected?
A good handover should answer these questions.
For MCS installers, the handover is an important opportunity to help customers understand their new system.
Show Customers How to Monitor Generation
Many modern solar PV systems provide information through an app or monitoring display.
These tools can help customers see how much electricity their system is generating.
However, not everyone is comfortable using this technology.
An installer should take time to explain what the figures mean.
Show the customer where to find information about daily, monthly and yearly generation.
Explain that generation will change with the weather and seasons.
Where the system provides suitable information, explain how customers can compare current performance with previous periods.
It is also worth making clear that low generation does not always mean a fault.
A dull winter day will naturally produce different results from a bright summer day.
Explain When Customers Should Ask for Help
Although lower winter generation is normal, installers should not dismiss every concern as a seasonal change.
A system can develop a genuine fault.
Customers should know how to recognise warning messages and where to find information about their equipment.
They should also know who to contact if the system appears to have stopped working or if they notice something unusual.
A clear support process can help prevent small concerns from becoming bigger complaints.
For installation businesses, this means making sure office staff know how to respond when customers telephone with questions.
They should understand when to provide general information and when a concern needs to be passed to someone with suitable technical knowledge.
What Happens When Customers Feel Misled?
Customer complaints can be difficult for any business.
They take time to investigate and may require additional visits or lengthy conversations.
They can also damage trust.
For solar installers, complaints about expected performance can be particularly challenging.
The system may be working correctly, but the customer may still feel disappointed.
Perhaps they expected larger savings.
Maybe they believed the panels would generate similar amounts of electricity throughout the year.
Or they may not understand why their electricity bill has increased during winter.
The best way to reduce these misunderstandings is to provide clear information before installation.
However, businesses also need suitable arrangements for dealing with concerns when they arise.
Listen Before Assuming There Is No Problem
When a customer reports poor performance, the first step should be to understand their concern.
Ask what they have noticed.
Review the available system information.
Check whether the reported performance is consistent with the expected conditions.
If further investigation is needed, explain what will happen next.
Do not automatically assume that the customer has misunderstood seasonal generation.
There may be a genuine issue with the system.
A fair and professional response helps protect the customer and the business.
Use Complaints to Improve Your Processes
If several customers contact your business each winter with similar concerns, it may be worth reviewing how seasonal generation is explained during the sales and handover stages.
Are customers receiving enough information?
Are estimates being explained clearly?
Do they understand the difference between annual generation and winter performance?
Sometimes a simple change to the way information is presented can prevent repeated misunderstandings.
A short seasonal performance guide or a clearer explanation during the handover may make a real difference.
The aim should not be to stop customers asking questions. It should be to make sure they have the information they need.
Five Ways Solar Installers Can Set Better Customer Expectations
For business owners and managers, improving customer understanding does not need to involve complicated changes.
Often, it begins with reviewing the information already being provided.
1. Review Your Sales Conversations
Make sure employees explain that solar electricity generation changes throughout the year.
Avoid focusing only on the strongest months or the most impressive savings figures.
Customers should receive a balanced explanation of what their system is expected to achieve.
2. Provide Clear Performance Estimates
Use the appropriate MCS requirements when preparing performance estimates.
Make sure customers understand that these are estimates and that actual results can vary.
Where helpful, explain how seasonal conditions affect generation.
3. Explain the Effect of Winter
Do not wait until December to explain why generation is lower.
Discuss shorter daylight hours, shading and weather conditions before the customer agrees to the installation.
A simple explanation early in the process can prevent confusion later.
4. Improve Your Handover Process
Show customers how to use their monitoring equipment and understand the information it provides.
Make sure they know where to find their documents and who to contact if they need help.
5. Review Customer Feedback
Look at the questions and complaints your business receives.
If the same misunderstandings keep appearing, consider whether your communication processes need improving.
Regular reviews can help identify areas where staff may need additional guidance.
The Benefits of an MCS Consultant’s Support
Running a solar installation business involves much more than fitting panels.
There are customers to support, installations to manage, employees to supervise and certification requirements to maintain.
Keeping sales information, installation records and customer handovers consistent can become more difficult as the business grows.
This is where the benefits of an MCS consultant’s support can become valuable.
An experienced MCS consultant can help businesses understand the requirements that apply to their work and review how those requirements are managed.
For example, they may support a business with reviewing its procedures for preparing quotations, managing installation records and completing customer handovers.
They can also help managers identify where responsibilities are unclear or where staff may need additional guidance.
For a growing solar business, this can be particularly useful.
Processes that worked well when the company completed a few installations each month may need improving as the number of jobs increases.
Clear responsibilities and consistent records can help maintain quality as the business develops.
An MCS consultant can also provide support when preparing for certification assessments or reviewing changes to scheme requirements.
However, consultancy support does not replace the business’s responsibility for meeting the relevant standards.
The installer remains responsible for the accuracy of its information, the quality of its work and the service provided to customers.
The aim of good support is to make those responsibilities easier to understand and manage.
Clear Expectations Build Better Customer Relationships
Solar PV systems can provide useful electricity throughout the year.
But winter generation will usually be lower than summer generation.
That is not a weakness that installers need to hide.
It is a normal part of how solar electricity generation works in the UK.
Customers who understand this are better prepared for the changes they will see.
They are also more likely to recognise the difference between normal seasonal performance and something that may need investigating.
For MCS installers, this is an important reminder that a successful installation involves more than fitting equipment correctly.
It also means helping customers understand what they have purchased.
Accurate estimates, honest conversations and clear handovers all play a part.
A customer who knows what to expect is less likely to feel disappointed when winter arrives.
And when customers do have concerns, a business that listens and provides clear support is better placed to maintain their trust.
Are Your Solar Customers Ready for Winter?
As the days become shorter, now is a good time for solar installation businesses to review how they explain seasonal performance.
Ask whether your customers understand the difference between summer and winter generation.
Check that your sales teams are providing realistic information.
Review your handover process and make sure customers know how to monitor their systems.
And consider whether your business has clear arrangements for responding when someone raises a concern.
At Compliant Ltd, we support renewable energy installation businesses with understanding MCS requirements, reviewing their processes and preparing for certification assessments.
Whether you are looking to improve your customer information, strengthen your installation records or better understand your MCS responsibilities, our consultants can provide practical guidance.
Speak to Compliant Ltd about your MCS certification plans and how our consultancy support can help your business deliver quality installations with confidence.



